SAG-254

Specifications Pioneer SAG-254
Height of Centre(mm) 254
Swing Over Bed (mm) 500
Swing Over Cross Slide (mm) 300
Distance Between Center (mm) 1000/1500/2000/2500/3000
Max. Swing in Gap (mm) 800
Bed
Bed Type 2 V & 2 Flat
Bed Width (mm) 325
Length of Gap in Front of Face Plate (mm) 175
Head Stock
Number of Spindle Speed 8
Spindle Speed Range : R.P.M. 30 to 1300(Std.) 40 to 1700(Optni.)
Type & Size of Spindle Nose A/2-6
Spindle Bore ( mm) 52mm
Spindle Taper Number MT -6
Diameter of Front Bearing OD 140 x ID 80
Feeds and Threads
Number of Feeds 72
Range of longitudinal Feeds (mm/Rev) 0.057 to 1.600
Range of Cross Feeds (mm/rev) 0.014 to 0.4
Number of Threads 105
Range of Metric Threads/No. 0.2 to 7 mm (33)
Range of Inch Threads,No. 72 to 4 TPI (36)
Range of Module Threads/No. 0.4 to 3 Module (15)
Range of D.P. Threads/No. 44 to 8 D.P. (21)
Leed Screw Dia (mm) 38.1
Leed Screw Pitch (mm) 6 mm
Saddle
Cross Slide Dimension (mm) 200 x 450
Cross Slide Travel (mm) 325
Tool Shank Section (mm) 25 x 25
Saddle Traverse (mm) 890/1390/1890/2390/2890
Compound Slide Traverse (mm) 150
Tail Stock
Spindle Dia (mm) 50.8
Spindle Taper Number MT-4
Spindle Travel 200
Lateral Move to Tail Stock (mm) 5
Motor
Main MKotor (Kw.) 3.75 (5 H.P.) Std. / 5.5  (7.5 H.P.) Optni.
Model Floor Space(Approx.) Weight kgs.(Approx.) Case Dimensions
Net Gross L W H
SAG-1 3200 x 1000 mm 1750 2075 3400 1100 1400
SAG-2 3800 x 1000 mm 1850 2150 4000 1100 1400
SAG-3 4300 x 1000 mm 2250 2550 4500 1100 1400
SAG-4 4800 x 1000 mm 2400 2800 5000 1100 1400
SAG-5 5300 x 1000 mm 2550 2900 5500 1100 1400
STANDARD ACESSORIES:
Four Position Tool Post, Toolpost Spanners, Center Adopter, 2 Nos. MT-4 Dead Centers, Electric Motor with Electrical Controls, Thread Dial Indicator, Change Gear Set, Chip Tray, Oil Gun, Tool Kit, Manual Book.

EXTRA ACCESSORIES:
Cam Lock Spindle in Lieu of standard, 12″ Center height in Lieu of standard, Face Plate (450 mm), Taper Turning Attachment, Electro-Mechanical Brake with Joy Stick Control, Rear Tool Post with Long Cross Slide, Keyway Cutting Attachment, Chuck Flange 8″, Chuck Flange 10″, Chuck Flange 12″, Follow Rest 10″, Steady Rest 10′, Quick change Tool Post with Tool Holders, Coolant pump with fittings, Rear Splash Guard, Carrier Plate, True Chuck, Dog Chuck, Digital Read out System (DRO).

Note:
(1) All The above specifications are approximate and subject to change without prior notice as improvements are made from time to time.
(2) The Description ” standard accessories / salient features ” confirms to its list not the photo of models shown in the catalogue and subject to change without prior notice as improvements are made from time to time.

error: Content is protected !!
Translate »
Pioneer Lathe Whatsapp