GHL-300

Specifications Pioneer GHL-300
Height of Centre(mm) 300
Swing Over Bed (mm) 600
Swing Over Cross Slide (mm) 370
Distance Between Center (mm) 1000/1500/2000/2500/3000/3500/4000
Max. Swing in Gap (mm) 850
Bed
Bed Type 2 V & 2 Flat
Bed Width (mm) 355
Length of Gap in Front of Face Plate (mm) 150
Head Stock
Number of Spindle Speeds 12
Spindle Speed Range : R.P.M. 27 to 700(Std.) 45 to 1200(Optni.)
Type & Size of Spindle Nose A/2 – 8
Spindle Bore ( mm) 80mm
Spindle Taper Number MT – 6
Diameter of Front Bearing OD 200 x ID 110
Feeds and Threads
Number of Feeds 72
Range of longitudinal Feeds (mm/Rev) 0.037 to 1.34
Range of Cross Feeds (mm/rev) 0.016 to 0.58
Number of Threads 105
Range of Metric Threads/No. 0.2 to 7 mm (33)
Range of Inch Threads,No. 72 to 4 TPI (36)
Range of Module Threads/No. 0.4 to 3 Module (15)
Range of D.P. Threads/No. 44 to 8 D.P. (21)
Leed Screw Dia (mm) 38.1
Leed Screw Pitch (mm) 6mm
Saddle
Cross Slide Dimension (mm) 250 x 500
Cross Slide Travel (mm) 325
Tool Shank Section (mm) 25 x 25
Saddle Traverse (mm) 900/1400/1900/2400/2900/3400/3900
Compound Slide Traverse (mm) 150
Tail Stock
Spindle Dia (mm) 63.5
Spindle Taper Number MT – 4
Spindle Travel 200
Lateral Move to Tail Stock (mm) 5
MOTOR
Main MKotor (Kw.) 5.5 (7.5 H.P.) Std. / 7.5 (10 H.P.)Optni.
Model Floor Space(Approx.) Weight kgs.(Approx.) Case Dimensions
Net Gross L W H
GHL-11 2700 x 1100 mm 2100 2400 2900 1200 1800
GHL-12 3200 x 1100 mm 2250 2550 3400 1200 1800
GHL-13 3800 x 1100 mm 2700 3000 4000 1200 1800
GHL-14 4400 x 1100 mm 3000 3400 4600 1200 1800
GHL-15 4900 x 1100 mm 3300 3750 5100 1200 1800
GHL-16 5400 x 1100 mm 3600 4000 5600 1200 1800

STANDARD ACESSORIES:
Four Position Tool Post, Toolpost Spanners, Center Adopter, 2 Nos. MT-4 Dead Centers, Electric Motor with Electrical controls, Thread Dial Indicator, Chip Tray, Oil Gun, Tool kit, Manual Book.

EXTRA ACCESSORIES:
14″ Center height in Lieu of standard, Face Plate, Taper Turning Attachment, Electro-Mechanical Brake with Joy Stick Control, Rear Tool Post with Long Cross Slide, Keyway Cutting Attachment, Chuck Flange 10″, Chuck Flange 12″, Follow Rest 12″, Steady Rest 12″, Quck change Tool Post with Tool Holders, Coolant pump with fittings, Rear Splash Guard, Carrier Plate, True Chuck, Dog Chuck, Digital Read out System (DRO).

Note:
(1) All The above specifications are approximate and subject to change without prior notice as improvements are made from time to time.
(2) The Description ” standard accessories / salient features ” confirms to its list not the photo of models shown in the catalogue and subject to change without prior notice as improvements are made from time to time.

error: Content is protected !!
Translate »
Pioneer Lathe Whatsapp