GHL-175

Specifications Pioneer GHL-175
Height of Centre(mm) 175
Swing Over Bed (mm) 350
Swing Over Cross Slide (mm) 176
Distance Between Center (mm) 750/1000
Max. Swing in Gap (mm) 620
Bed
Bed Type 2 V and 2 Flat
Bed Width (mm) 280
Length of Gap in Front of Face Plate (mm) 160
Head Stock
Number of Spindle Speeds 8 (std.) 16(optnl.)
Spindle Speed Range : R.P.M. 54-1200 (std.) 54-1700 (optnl.)
Type and Size of Spindle Nose Cam Lock, size D1-4
Spindle Bore ( mm) 40 mm
Spindle Taper Number MT – 5
Diameter of Front Bearing OD 110 x ID 60
Feeds and Threads
Number of Feeds 72
Range of longitudinal Feeds (mm/Rev) 0.033 to 0.739
Range of Cross Feeds (mm/rev) 0.021 to 0.458
Number of Threads 104
Range of Metric Threads/No. 0.2 to 7mm (32)
Range of Inch Threads,No. 72 to 4 TPI (36)
Range of Module Threads/No. 0.4 to 3 Module (15)
Range of D.P. Threads/No. 44 to 8 D.P. (21)
Leed Screw Dia (mm) 31.75
Leed Screw Pitch (mm) 6 mm
Saddle
Cross Slide Dimension (mm) 178 x 415
Cross Slide Travel (mm) 225
Tool Shank Section (mm) 22 x 22
Saddle Traverse (mm) 640/890
Compound Slide Traverse (mm) 130
Tail Stock
Spindle Dia (mm) 50.8
Spindle Taper Number MT-3
Spindle Travel 175
Lateral Move to Tail Stock (mm) 5
Motor
Main MKotor (Kw.) 1.5 (2 H.P.)
Model Floor Space(Approx.) Weight kgs.(Approx.) Case Dimensions
Net Gross L W H
GHL-1 2300 x 1000 mm 1000 1200 2500 1100 1600
GHL-2 2600 x 1000 mm 1200 1400 2800 1100 1600

STANDARD ACESSORIES:
Four Position Tool Post, Toolpost Spanners, Center Adopter, 2 Nos. MT-3 Dead Centers, Electric Motor with Electrical Controls, Thread Dial Indicator, Camlock operating Handle, Chip Tray, Oil Gun, Tool kit, Manual Book.

EXTRA ACCESSORIES:
Collet attachment & collets, Taper Turning Attachment, Rear Tool Post, Electro-Mechanical Brake with Joy Stick Control, Machine Lamp, Chuck Flange, Face plate, Follow Rest, Steady Rest, Quick change Tool Post, Coolant Pump & Fitting, Rear Splash Guard, Carrier Plate, True Chuck, Dog Chuck, Digital Read out System (DRO).

Note:
(1) All The above specifications are approximate and subject to change without prior notice as improvements are made from time to time.
(2) The Description ” standard accessories / salient features ” confirms to its list not the photo of models shown in the catalogue and subject to change without prior notice as improvements are made from time to time.

error: Content is protected !!
Translate »
Pioneer Lathe Whatsapp