Ecoturn

Specifications Pioneer Ecoturn
Height of Centre (mm) 215
Swing Over Bed (mm) 425
Swing Over Cross Slide (mm) 250
Distance Between Center (mm) 750/1000
Max. Swing in Gap (mm) 620
Bed
Bed Type 2 V & 2 Flat
Bed Width (mm) 279mm
Length of Gap in Front of Face Plate (mm) 120
Head Stock
Number of Spindle Speeds 8
Spindle Speed Range : R.P.M. 54 TO 1200
Type & Size of Spindle Nose A/2-4
Spindle Bore ( mm) 40 mm
Spindle Taper Number MT – 5
Diameter of Front Bearing OD 110 x ID 60
Capicity Threads
Number of Feeds 55
Range of Longitudinal Feeds(mm/Rev) 0.08 – 1.48mm/Rev.
Range of Cross Feeds(mm/Rev) 0.017 – 0.250mm/Rev.
Number of Threads 55
Range of Metric Threads./No. 0.5 to 7.5mm(20)
Range of Inch Threads/No. 60 to 4 T.P.I.(35)
Range of Module Threads/No.
Range of D.P Threads/No.
Leed Screw Dia (mm) 31.75
Leed Screw Pitch (mm) 4 T.P.I.
Saddle
Cross Slide Dimension(mm) 168 x 367
Cross Slide Travel(mm) 225
Tool shank Section(mm) 25mm x 25mm
Saddle Traverse(mm) 640/890mm
Compound SlideTraverse(mm) 130
Tail Stock
Spindle Dia(mm) 50.8
Spindle Taper Number MT-3
Spindle Travel 175
Lateral Move to Tail Stock (mm) 5
Motor
Main Motor(Kw.) 1.5 (2 H.P.)
Model Floor Space(Approx.) Weight kgs.(Approx.) Case Dimensions
Net Gross L W H
ECT-1 2300 x 1000 mm 920 1120 2500 1100 1600
ECT-2 2600 x 1000 mm 980 1180 2800 1100 1600

STANDARD ACESSORIES:
Four Position Tool Post, Toolpost Spanners, Center Adopter, 2 Nos. MT-3 Dead Centers, Electric Motor with Reverse & Forward Switch, Thread Dial Indicator, Chip Tray, Oil Gun, Tool kit, Manual Book.

EXTRA ACCESSORIES:
Collet attachment & collets , Taper Turning Attachment, Rear Tool Post, Electro-Mechanical Brake with Joy Stick  Control & Panel Board, Machine Lamp, Chuck Flange, Face plate, Follow Rest, Steady Rest, Quick change Tool Post, Coolant Pump & Fitting, Rear Splash Guard, Carrier Plate, True Chuck, Dog Chuck, Digital Read out System (DRO).

Note:
(1) All The above specifications are approximate and subject to change without prior notice as improvements are made from time to time.
(2) The Description ” standard accessories / salient features ” confirms to its list not the photo of models shown in the catalogue and subject to change without prior notice as improvements are made from time to time.

error: Content is protected !!
Translate »
Pioneer Lathe Whatsapp