Tool Room All Geared
LATHE MACHINES
| Specifications | Pioneer GHL-250 |
|---|---|
| Height of Centre(mm) | 250 |
| Swing Over Bed (mm) | 500 |
| Swing Over Cross Slide (mm) | 290 |
| Distance Between Center (mm) | 1000/1500 |
| Max. Swing in Gap (mm) | 770 |
| Bed | |
| Bed Type | 2 V and 2 Flat |
| Bed Width (mm) | 355 |
| Length of Gap in Front of Face Plate (mm) | 160 |
| Head Stock | |
| Number of Spindle Speed | 18 |
| Spindle Speed Range : R.P.M. | 32 to 1600(Std.) 40 to 2000(Optni.) |
| Type and Size of Spindle Nose | Cam Lock, size 6* |
| Spindle Bore ( mm) | 55mm |
| Spindle Taper Number | MT – 6 |
| Diameter of Front Bearing | OD 150 x ID 85 |
| Feeds and Threads | |
| Number of Feeds | 76 |
| Range of longitudinal Feeds (mm/Rev) | 0.037 to 1.34 |
| Range of Cross Feeds (mm/rev) | 0.016 to 0.58 |
| Number of Threads | 106 |
| Range of Metric Threads/No. | 0.2 to 7 mm (33) |
| Range of Inch Threads,No. | 72 to 4 T.P.I. (36) |
| Range of Module Threads/No. | 0.3 to 3 Module (16) |
| Range of D.P. Threads/No. | 44 to 8 D.P. (21) |
| Leed Screw Dia (mm) | 38.1 |
| Leed Screw Pitch (mm) | 6 mm |
| Saddle | |
| Cross Slide Dimension (mm) | 250 x 500 |
| Cross Slide Travel (mm) | 325 |
| Tool Shank Section (mm) | 25 x 25 |
| Saddle Traverse (mm) | 890/1390 |
| Compound Slide Traverse (mm) | 150 |
| TAIL STOCK | |
| Spindle Dia (mm) | 63.5 |
| Spindle Taper Number | MT-4 |
| Spindle Travel | 200 |
| Lateral Move to Tail Stock (mm) | 5 |
| MOTOR | |
| Main Motor (Kw.) | 3.75 (5 H.P.) |
| Model | Floor Space(Approx.) | Weight kgs.(Approx.) | Case Dimensions | |||
|---|---|---|---|---|---|---|
| Net | Gross | L | W | H | ||
| GHL-5 | 2800 x 1000 mm | 1800 | 2100 | 3000 | 1100 | 1600 |
| GHL-6 | 3300 x 1000 mm | 2100 | 2400 | 3500 | 1100 | 1600 |
STANDARD ACESSORIES:
Four Position Tool Post, Toolpost Spanners, Center Adopter, 2 Nos. MT-3 Dead Centers, Electric Motor with Electrical Controls, Thread Dial Indicator, Camlock operating Handle, Chip Tray, Oil Gun, Tool kit, Manual Book.
EXTRA ACCESSORIES:
Collet attachment & collets, Taper Turning Attachment, Rear Tool Post, Electro-Mechanical Brake with Joy Stick Control, Machine Lamp, Chuck Flange, Face plate, Follow Rest, Steady Rest, Quick change Tool Post, Coolant Pump & Fitting, Carrier Plate, Rear Splash Guard, True Chuck, Dog Chuck, Digital Read out System (DRO).
Note:
(1) All The above specifications are approximate and subject to change without prior notice as improvements are made from time to time.
(2) The Description ” standard accessories / salient features ” confirms to its list not the photo of models shown in the catalogue and subject to change without prior notice as improvements are made from time to time.
